3HR918+[46-300/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR

Brand Name:THK
Model Number:3HR918+[46-300/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]
Series:HM746600
Cone Part Number:HM746646
Design Units:Imperial
Cage Type:Pin-Type
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:372000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:96500 lbf
d:9.0000 in
B - Cone Width:2.7500 in
PDF 3HR918+[46-300/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]

Product Details

SeriesHM746600
Cone Part NumberHM746646
Design UnitsImperial
Cage TypePin-Type
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1372000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)296500 lbf
d9.0000 in
B - Cone Width2.7500 in
R - Cone Backface To Clear Radius30.25 in
da - Cone Frontface Backing Diameter9.76 in
db - Cone Backface Backing Diameter10.16 in
Ab - Cage-Cone Frontface Clearance0.21 in
Aa - Cage-Cone Backface Clearance0.19 in
a - Effective Center Location40.27 in
C90 - Dynamic Radial Rating (90 million revolutions)555400 lbf
C1 - Dynamic Radial Rating (1 million revolutions)6214000 lbf
C0 - Static Radial Rating380000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)744900 lbf
K - Factor81.24
G1 - Heat Generation Factor (Roller-Raceway)1190
G2 - Heat Generation Factor (Rib-Roller End)149
Cg - Geometry Factor0.154
View more

Company Profile

Phone 91-22-28768900
View more

Related News

  • How to draw cam profile - Oscillating roller follower - YouTubeThis video explains how to draw cam profile in case of an oscillating roller follower. The problem statement How to draw a cam profile - Roller follower - YouTubeThe valve must remain in...
  • Slipping Manual Clutch: Causes And RepairsAug 13, 2019 — At first, you'll struggle to transition between the clutch and the next gear without jerky movements. The trick is to let the clutch out slowly before  How to Diagnose a...
  • Unit 11 Section 3 : BearingsBearings are a measure of direction, with North taken as a reference. Note that the first two bearings above are in directly opposite directions to each other Form 1 Unit 10 Lesson 5-Bearing – BRILLIANT MATHSMar 14,...
  • Recommended Products

    All Products Contact Now