3SRS9WGSC1+[52-900/1]L[H,​P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable

Brand Name:THK
Model Number:3SRS9WGSC1+[52-900/1]L[H,​P]M
Series:HH224300
Cone Part Number:HH224334
Cup Part Number:HH224310V
Design Units:Imperial
Bearing Weight:11.2 Kg
Cage Type:Stamped Steel
d:99.974 mm
D:212.725 mm
PDF 3SRS9WGSC1+[52-900/1]L[H,​P]M

Product Details

SeriesHH224300
Cone Part NumberHH224334
Cup Part NumberHH224310V
Design UnitsImperial
Bearing Weight11.2 Kg
Cage TypeStamped Steel
d99.974 mm
D212.725 mm
B - Cone Width66.675 mm
C - Cup Width53.975 mm
B66.678 mm
R - Cone Backface To Clear Radius13.560 mm
r - Cup Backface To Clear Radius23.30 mm
da - Cone Frontface Backing Diameter119.89 mm
db - Cone Backface Backing Diameter123.95 mm
Da - Cup Frontface Backing Diameter201.70 mm
Db - Cup Backface Backing Diameter192.02 mm
Ab - Cage-Cone Frontface Clearance3.8 mm
Aa - Cage-Cone Backface Clearance4.1 mm
a - Effective Center Location3-18.8 mm
C90 - Dynamic Radial Rating (90 million revolutions)439600 lbf
C1 - Dynamic Radial Rating (1 million revolutions)5153000 lbf
C0 - Static Radial Rating204000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)622100 lbf
K - Factor71.79
e - ISO Factor80.33
Y - ISO Factor91.84
G1 - Heat Generation Factor (Roller-Raceway)366.6
G2 - Heat Generation Factor (Rib-Roller End)47.9
Cg - Geometry Factor0.118
View more

Company Profile

Phone 91-22-28768900
View more

Related News

  • How to draw cam profile - Oscillating roller follower - YouTubeThis video explains how to draw cam profile in case of an oscillating roller follower. The problem statement How to draw a cam profile - Roller follower - YouTubeThe valve must remain in...
  • Slipping Manual Clutch: Causes And RepairsAug 13, 2019 — At first, you'll struggle to transition between the clutch and the next gear without jerky movements. The trick is to let the clutch out slowly before  How to Diagnose a...
  • Unit 11 Section 3 : BearingsBearings are a measure of direction, with North taken as a reference. Note that the first two bearings above are in directly opposite directions to each other Form 1 Unit 10 Lesson 5-Bearing – BRILLIANT MATHSMar 14,...
  • Recommended Products

    All Products Contact Now