3SRS5WGM+[22-220/1]L[H,​P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable

Brand Name:THK
Model Number:3SRS5WGM+[22-220/1]L[H,​P]M
Series:55000
Cone Part Number:55196
Cup Part Number:55433D
Design Units:Imperial
Bearing Weight:5.76 lb
Cage Type:Stamped Steel
Ab - Cage-Cone Frontface Clearance:0.16 in
d:1.9675 in
PDF 3SRS5WGM+[22-220/1]L[H,​P]M

Product Details

Series55000
Cone Part Number55196
Cup Part Number55433D
Design UnitsImperial
Bearing Weight5.76 lb
Cage TypeStamped Steel
Ab - Cage-Cone Frontface Clearance0.16 in
d1.9675 in
D4.3300 in
B - Cone Width1.0594 in
C - Double Cup Width1.6876 in
T - Bearing Width across Cones2.4999 in
R - Cone Backface To Clear Radius10.14 in
r - Cup Frontface To Clear Radius20.02 in
db - Cone Backface Backing Diameter2.8 in
Da - Cup Frontface Backing Diameter4.15 in
Aa - Cage-Cone Backface Clearance0.16 in
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)37350 lbf
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)449400 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)512800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)611100 lbf
K - Factor70.66
e - ISO Factor80.88
Y1 - ISO Factor90.76
Y2 - ISO Factor101.14
G1 - Heat Generation Factor (Roller-Raceway)1136.8
G2 - Heat Generation Factor (Rib-Roller End)13.2
Cg - Geometry Factor120.109
View more

Company Profile

Phone 91-22-28768900
View more

Related News

  • How to draw cam profile - Oscillating roller follower - YouTubeThis video explains how to draw cam profile in case of an oscillating roller follower. The problem statement How to draw a cam profile - Roller follower - YouTubeThe valve must remain in...
  • Slipping Manual Clutch: Causes And RepairsAug 13, 2019 — At first, you'll struggle to transition between the clutch and the next gear without jerky movements. The trick is to let the clutch out slowly before  How to Diagnose a...
  • Unit 11 Section 3 : BearingsBearings are a measure of direction, with North taken as a reference. Note that the first two bearings above are in directly opposite directions to each other Form 1 Unit 10 Lesson 5-Bearing – BRILLIANT MATHSMar 14,...
  • Recommended Products

    All Products Contact Now