3SRS9WGS[SS,​SSHH,​UU]+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable

Brand Name:THK
Model Number:3SRS9WGS[SS,​SSHH,​UU]+[52-900/1]LM
Series:LM245800
Cone Part Number:LM245848
Cup Part Number:LM245810
Design Units:Imperial
Bearing Weight:10.60 Kg
Cage Type:Stamped Steel
d:231.775 mm
D:317.500 mm
PDF 3SRS9WGS[SS,​SSHH,​UU]+[52-900/1]LM

Product Details

SeriesLM245800
Cone Part NumberLM245848
Cup Part NumberLM245810
Design UnitsImperial
Bearing Weight10.60 Kg
Cage TypeStamped Steel
d231.775 mm
D317.500 mm
B - Cone Width52.388 mm
C - Cup Width36.513 mm
B47.628 mm
R - Cone Backface To Clear Radius13.300 mm
r - Cup Backface To Clear Radius23.30 mm
da - Cone Frontface Backing Diameter245.11 mm
db - Cone Backface Backing Diameter247.90 mm
Da - Cup Frontface Backing Diameter306.58 mm
Db - Cup Backface Backing Diameter298.96 mm
Ab - Cage-Cone Frontface Clearance2 mm
Aa - Cage-Cone Backface Clearance1.3 mm
a - Effective Center Location32.5 mm
C90 - Dynamic Radial Rating (90 million revolutions)430200 lbf
C1 - Dynamic Radial Rating (1 million revolutions)5116000 lbf
C0 - Static Radial Rating214000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)616500 lbf
K - Factor71.83
e - ISO Factor80.32
Y - ISO Factor91.88
G1 - Heat Generation Factor (Roller-Raceway)945.2
G2 - Heat Generation Factor (Rib-Roller End)187.4
Cg - Geometry Factor0.125
View more

Company Profile

Phone 91-22-28768900
View more

Related News

  • How to draw cam profile - Oscillating roller follower - YouTubeThis video explains how to draw cam profile in case of an oscillating roller follower. The problem statement How to draw a cam profile - Roller follower - YouTubeThe valve must remain in...
  • Slipping Manual Clutch: Causes And RepairsAug 13, 2019 — At first, you'll struggle to transition between the clutch and the next gear without jerky movements. The trick is to let the clutch out slowly before  How to Diagnose a...
  • Unit 11 Section 3 : BearingsBearings are a measure of direction, with North taken as a reference. Note that the first two bearings above are in directly opposite directions to each other Form 1 Unit 10 Lesson 5-Bearing – BRILLIANT MATHSMar 14,...
  • Recommended Products

    All Products Contact Now