4HR1530M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[70-800/1]LM THK Separated Linear Guide Side Rails Set Model HR

Brand Name:THK
Model Number:4HR1530M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[70-800/1]LM
Series:580000
Cone Part Number:EE580537
Cup Part Number:581200
Design Units:Imperial
Bearing Weight:26.10 Kg
Cage Type:Stamped Steel
d:136.525 mm
D:304.8 mm
PDF 4HR1530M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[70-800/1]LM

Product Details

Series580000
Cone Part NumberEE580537
Cup Part Number581200
Design UnitsImperial
Bearing Weight26.10 Kg
Cage TypeStamped Steel
d136.525 mm
D304.8 mm
B - Cone Width79.375 mm
C - Cup Width55.563 mm
B79.375 mm
R - Cone Backface To Clear Radius112.700 mm
r - Cup Backface To Clear Radius23.30 mm
da - Cone Frontface Backing Diameter159 mm
db - Cone Backface Backing Diameter182.88 mm
Da - Cup Frontface Backing Diameter272.00 mm
Db - Cup Backface Backing Diameter265.94 mm
Ab - Cage-Cone Frontface Clearance3.81 mm
Aa - Cage-Cone Backface Clearance13.21 mm
a - Effective Center Location3-14.2 mm
C90 - Dynamic Radial Rating (90 million revolutions)444500 lbf
C1 - Dynamic Radial Rating (1 million revolutions)5172000 lbf
C0 - Static Radial Rating233000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)633000 lbf
K - Factor71.35
e - ISO Factor80.43
Y - ISO Factor91.38
G1 - Heat Generation Factor (Roller-Raceway)509.9
G2 - Heat Generation Factor (Rib-Roller End)56.6
Cg - Geometry Factor0.113
View more

Company Profile

Phone 91-22-28768900
View more

Related News

  • How to draw cam profile - Oscillating roller follower - YouTubeThis video explains how to draw cam profile in case of an oscillating roller follower. The problem statement How to draw a cam profile - Roller follower - YouTubeThe valve must remain in...
  • Slipping Manual Clutch: Causes And RepairsAug 13, 2019 — At first, you'll struggle to transition between the clutch and the next gear without jerky movements. The trick is to let the clutch out slowly before  How to Diagnose a...
  • Unit 11 Section 3 : BearingsBearings are a measure of direction, with North taken as a reference. Note that the first two bearings above are in directly opposite directions to each other Form 1 Unit 10 Lesson 5-Bearing – BRILLIANT MATHSMar 14,...
  • Recommended Products

    All Products Contact Now