4HR2042[F(AP-C),​F(AP-CF),​F(AP-HC)]+[93-2200/1]L THK Separated Linear Guide Side Rails Set Model HR

Brand Name:THK
Model Number:4HR2042[F(AP-C),​F(AP-CF),​F(AP-HC)]+[93-2200/1]L
Series:495
Cone Part Number:495
Cup Part Number:493DC
Design Units:Imperial
Bearing Weight:7.8 lb
Cage Type:Stamped Steel
Ab - Cage-Cone Frontface Clearance:0.12 in
d:3.2500 in
PDF 4HR2042[F(AP-C),​F(AP-CF),​F(AP-HC)]+[93-2200/1]L

Product Details

Series495
Cone Part Number495
Cup Part Number493DC
Design UnitsImperial
Bearing Weight7.8 lb
Cage TypeStamped Steel
Ab - Cage-Cone Frontface Clearance0.12 in
d3.2500 in
D5.3750 in
B - Cone Width1.1720 in
C - Double Cup Width2.125 in
T - Bearing Width across Cones2.7500 in
R - Cone Backface To Clear Radius10.14 in
r - Cup Frontface To Clear Radius20.03 in
db - Cone Backface Backing Diameter3.82 in
Da - Cup Frontface Backing Diameter5.16 in
Aa - Cage-Cone Backface Clearance0.07 in
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)39000 lbf
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)460500 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)515700 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)66850 lbf
K - Factor71.31
e - ISO Factor80.44
Y1 - ISO Factor91.52
Y2 - ISO Factor102.26
G1 - Heat Generation Factor (Roller-Raceway)11105
G2 - Heat Generation Factor (Rib-Roller End)29.3
Cg - Geometry Factor120.125
View more

Company Profile

Phone 91-22-28768900
View more

Related News

  • How to draw cam profile - Oscillating roller follower - YouTubeThis video explains how to draw cam profile in case of an oscillating roller follower. The problem statement How to draw a cam profile - Roller follower - YouTubeThe valve must remain in...
  • Slipping Manual Clutch: Causes And RepairsAug 13, 2019 — At first, you'll struggle to transition between the clutch and the next gear without jerky movements. The trick is to let the clutch out slowly before  How to Diagnose a...
  • Unit 11 Section 3 : BearingsBearings are a measure of direction, with North taken as a reference. Note that the first two bearings above are in directly opposite directions to each other Form 1 Unit 10 Lesson 5-Bearing – BRILLIANT MATHSMar 14,...
  • Recommended Products

    All Products Contact Now