HSR30HB[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]M+[134-2520/1]LM THK Standard Linear Guide Accuracy and Preload Selectable HSR Series

Brand Name:THK
Model Number:HSR30HB[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]M+[134-2520/1]LM
Series:470000
Cone Part Number:EE470078
Cup Part Number:470132
Design Units:Imperial
Bearing Weight:33.30 Kg
Cage Type:Stamped Steel
d:177.800 mm
D:336.550 mm
PDF HSR30HB[1,​2,​3,​4,​5,​6,​7,​8,​9]C[0,​1]M+[134-2520/1]LM

Product Details

Series470000
Cone Part NumberEE470078
Cup Part Number470132
Design UnitsImperial
Bearing Weight33.30 Kg
Cage TypeStamped Steel
d177.800 mm
D336.550 mm
B - Cone Width92.075 mm
C - Cup Width63.500 mm
B90.488 mm
R - Cone Backface To Clear Radius16.35 mm
r - Cup Backface To Clear Radius26.35 mm
da - Cone Frontface Backing Diameter200.91 mm
db - Cone Backface Backing Diameter210.06 mm
Da - Cup Frontface Backing Diameter306.83 mm
Db - Cup Backface Backing Diameter297.94 mm
Ab - Cage-Cone Frontface Clearance0.3 mm
Aa - Cage-Cone Backface Clearance13 mm
a - Effective Center Location3-21.8 mm
C90 - Dynamic Radial Rating (90 million revolutions)459200 lbf
C1 - Dynamic Radial Rating (1 million revolutions)5229000 lbf
C0 - Static Radial Rating354000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)637100 lbf
K - Factor71.6
e - ISO Factor80.37
Y - ISO Factor91.64
G1 - Heat Generation Factor (Roller-Raceway)914.1
G2 - Heat Generation Factor (Rib-Roller End)104.7
Cg - Geometry Factor0.13
View more

Company Profile

Phone 91-22-28768900
View more

Related News

  • How to draw cam profile - Oscillating roller follower - YouTubeThis video explains how to draw cam profile in case of an oscillating roller follower. The problem statement How to draw a cam profile - Roller follower - YouTubeThe valve must remain in...
  • Slipping Manual Clutch: Causes And RepairsAug 13, 2019 — At first, you'll struggle to transition between the clutch and the next gear without jerky movements. The trick is to let the clutch out slowly before  How to Diagnose a...
  • Unit 11 Section 3 : BearingsBearings are a measure of direction, with North taken as a reference. Note that the first two bearings above are in directly opposite directions to each other Form 1 Unit 10 Lesson 5-Bearing – BRILLIANT MATHSMar 14,...
  • Recommended Products

    All Products Contact Now