| 3SRS9WGS[SS,SSHH,UU]C1+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | d:440 mm; Grease:10640 kN; B:226 mm; Dynamic (Cr):12 mm; rs (min):6 mm; D:720 mm; with tapered bore:530 min-1; Static (Cor):22.3 mm; with cylindrical bore:430 min-1; Pu:5600 kN; Oil:765.770 kN; |
| 3SRS9WGNC1+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | da min.:64 mm; Mass bearing:0.6 kg; Calculation factor kr:0.025; D2 ≈:90.45 mm; D:100 mm; Limiting speed:4300 r/min; r1,2 min.:1.5 mm; Basic dynamic load rating C:46.2 kN; ra max.:1.5 mm; da max.:64.9 mm; Basic static load rating C0:29 kN; d2 ≈:65.263 mm; Calculation factor f0:14.3; B:21 |
| 3SRS9WGS+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Accessories:Two Seals; B:8.00 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:26000 rpm; Oil Speed Rating Open/Shielded n2:32000 rpm; Sealed Speed Rating n3:17000 rpm; D:28.0000 mm; d:12.000 mm; Basic Static Radial Load Rating Co:2360 N; Basic Dynamic Radial Load Rating C:5070 N; |
| 3SRS9WGSC1+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | N1:26.988 mm; J min.:295.275 mm; Bearing limiting speed:4500 r/min; Initial grease fill:181.44 g; P120°:52.5 kN; Cap bolt, SAE grade:8; da:84.138 mm; h:42.069 mm; PG:1/4 NPT; P150°:48 kN; S:4.763 mm; L:387.35 mm; Ca:55.804 mm; End plug (suffix Y):EPR 12; A2:155.575 mm; ba:44.45 mm; Labyrinth |
| 3SRS9WGN[SS,SSHH,UU]+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | End plug (suffix Y):EPR 15; R2:36.513 mm; P150°:118 kN; da:112.713 mm; RG:1/2 NPT; Mass pillow block:83.9 kg; Appropriate attachment bolt size G:0.875 in; S:4.763 mm; Housing:SAFS 526; J min.:371.475 mm; h:60.325 mm; A1:130.175 mm; A2:279.4 mm; ba:57.944 mm; P120°:125 kN; R1:79.375 mm; Da:23 |
| 3SRS9WGN[SS,SSHH,UU]+[52-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | b1:7.7 mm; Basic static load rating C0:1560 kN; Specific dynamic load factor K:150 N/mm²; Mass plain bearing:2.4 kg; D:105 mm; C:40 mm; Material constant KM:330; b:7.7 mm; Da max.:99 mm; Specific static load factor K0:500 N/mm²; ra max.:1 mm; Da min.:92 mm; Basic dynamic load rating C:465 |
| 3SRS9WGN[SS,SSHH,UU]C1+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | b1:mm; F:114 mm; d2 (max):mm; B:43 mm; Dynamic (Ca):233 kN; D:170 mm; b:mm; r1s (min):2.1 mm; E:mm; rs (min):2.1 mm; Pu:31.430 kN; s:3 mm; d2:95 mm; Static (Coa):282 kN; |
| 3SRS9WGS+[52-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | D:200.0000 mm; Grease Speed Rating n1:2000 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:3000 rpm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:300000 N; B:90.00 mm; Basic Dynamic Radial Load Rating C:276000 N; d:95.000 mm; |
| 3SRS9WGN[SS,SSHH,UU]C1+[52-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Stabilizing ring:2 x 38151-40; A1:171.45 mm; Cap bolt, SAE grade:5; PG:1/4 NPT; Initial grease fill:878.85 g; Labyrinth ring:2 x LOR 160; P150°:77 kN; Max. speed for PosiTrac Plus seal:800 r/min; H2:69.85 mm; J min.:492.125 mm; Eye bolt:2 x 3/8-16 UNC; J1:107.95 mm; Appropriate attachment bolt s |
| 3SRS9WGN+[52-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | L:387.35 mm; P150°:40 kN; Max. speed for Taconite seal:725 r/min; R1:58.737 mm; Taconite seal:TER 111; PG:1/4 NPT; Appropriate attachment bolt size G:0.75 in; Pa:16.7 kN; da:103.188 mm; End plug (suffix Y):EPR 14; P120°:44.5 kN; N1:22.225 mm; H2:44.45 mm; Ca:55.804 mm; P90°:71.2 kN; A1:1 |
| 3SRS9WGS[SS,SSHH,UU]C1+[52-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Coefficient of friction µ min.:0.08; Specific static load factor K0:45 N/mm²; Coefficient of friction µ max.:0.15; a:5 mm; D:95 mm; Tolerance shaft:e7; α:124 °; h:81.5 mm; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:1.83 kg; d:80 mm; B:100 mm; |
| 3SRS9WGSC1+[52-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | H1:95.25 mm; S:4.763 mm; Housing:SAF 517; End plug (suffix Y):EPR 9; H2:31.75 mm; P150°:28.5 kN; J max.:279.4 mm; Stabilizing ring:SR-17-14; Appropriate attachment bolt size G:0.75 in; P60°:84.5 kN; Da:150 mm; Pa:9.25 kN; Taconite seal:TER 54; J min.:250.825 mm; A2:198.438 mm; ba:35.719 mm; |
| 3SRS9WGN+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Ball diameter Dw:6.35 mm; d2:36.4 mm; Basic static load rating C0:5.2 kN; Calculation factor f0:7.9; Preload class C GC:300 N; Calculation factor f2A:1; d:30 mm; Number of balls z:17; Reference grease quantity Gref:1.7 cm³; rb max.:0.6 mm; db min.:34.6 mm; d1:38.2 mm; Attainable speed for greas |
| 3SRS9WGS[SS,SSHH,UU]+[52-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Basic dynamic load rating C:39 kN; r1,2 min.:1 mm; s:23 mm; R:56 mm; Da max.:60 mm; D:73 mm; d:35 mm; ra max.:1 mm; B:9 mm; Fatigue load limit Pu:3.2 kN; D1 ≈:47 mm; D2:60 mm; D3:78 mm; C:7.5 mm; Reference speed:2600 r/min; Minimum load factor A:0.038; da:45 mm; H:39.6 mm; Basic static load ra |
| 3SRS9WGS[SS,SSHH,UU]+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | T:23 mm; d2:55 mm; Dynamic (Ca):76.4 kN; rs (min):1.5 mm; a:20 mm; Pu:13.170 kN; D:90 mm; r1s (min):1.5 mm; r2s (min):0.6 mm; C:17.5 mm; B:23 mm; Static (Coa):108 kN; |
| 3SRS9WGNC1+[52-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | r min.:0.8 mm; Fatigue load limit Pu:1.56 kN; Designation bearing:BK 2212; Reference speed:11000 r/min; C1 min.:9.3 mm; Basic dynamic load rating C:8.8 kN; C:12 mm; Mass bearing:0.018 kg; Inner ring IR series:IR 17x22x13; Basic static load rating C0:13.7 kN; D:28 mm; Fw:22 mm; Limiting speed:12000 r |